Performance and use:
Constructed of a wear-resistant, filled PTFE ring and O-ring. The O-ring provides a pre-tightening force to compensate for the wear of PTFE square rings. Suitable for hydraulic cylinder piston seal, two-way seal. General and supporting the use of guide ring. Pore size less than 40 specifications, should be used split groove.
Material: PTFE + NBR, under special circumstances using rubber fluorine rubber FKM.
Working conditions:
Working pressure: 0-40MPa;
Reciprocation speed: ≤5m / s;
Operating temperature: O-ring for the glue NBR: -30 ~ +120 ºC, fluorine rubber FKM: -20 ~ +200 ºC;
Working medium: hydraulic oil, gas, water (in the phosphate ester hydraulic oil use fluoride rubber).
design standards:
This series conforms to the ISO 7425/1 standard, complies with GB / T15242.1-94 and GB / T15242.3-94 standards, reference to Trelleborg GS55044 series, Merkel OMK-MR series and Parker OE series.
STD seals: a combination of rubber O-ring and polytetrafluoroethylene ring. O-ring force, grid to circle for the double acting piston seal. Low friction, no crawling, small start force, high pressure. The lattice ring is usually composed of a synthetic rubbery ○-shaped seal and a polytetrafluoroethylene-filled square seal, which can be divided into holes for the ring and the ring, but the seal The role is the same, according to its own deformation on the sealing surface to produce a higher initial contact stress, to prevent leakage of non-pressure liquid. When the hydraulic cylinder is operated, the pressure liquid is extruded through the square seal through the elastic deformation of the ○ -shaped seal to close the sealing surface to produce a higher additional contact stress with increased pressure of the pressurized liquid and Together with the initial contact stress together to prevent leakage of the pressure liquid.
A rod, shaft, and swivel, used for rotation or swinging. It is a two-way pressure or by the role of pressure acting two-way rotating ring. It consists of a combination of a dynamic seal ring and a static O-ring. Seal ring The outer ring seal is specially designed to accommodate high pressure and low speed conditions. One or two annular grooves on the sealing surface can increase the specific pressure of the sealing surface, thus also improving the sealing effect, the groove forming the lubricating oil Cavity, but also reduces the friction, which has a good operational.
Technical data: working pressure: 30PMa, working temperature: -30 ºC ~ +120 ºC (O-ring material for the Dingqing rubber 70), - 20 ºC ~ +205 ºC (O-ring material for the fluorine rubber 80), the peripheral speed : To 5m / s, working medium: mineral oil hydraulic oil and flame retardant hydraulic oil. Material: Seal ring ------ Polytetrafluoroethylene / carbon compound D32, O-ring ----- Dingqing rubber 70 or fluorine rubber.
We can design and manufacture various rubber parts, custom-made is welcome
material: NBR, FKM, EPDM, silicon rubber are available.
size: hundreds
custom-made is welcome.
Welcome to contact anytime
| terial |
NBR, FKM, ,VMQ , |
| Hardness |
Shore 70-90 or according to order |
| MOQ |
100 PCS |
| Sample |
Free, |
| Colors |
Black, brown, red, white, black, green, blue, |
| Size |
OD can be 12mm to 2000 mm |
| Packing |
10 or 20 pcs/paper, then in carton |
| Production Time |
10-15 days |
| OEM |
Acceptable |
| Mold charge |
free |
Audited Supplier 
){kind=link}